Radwag PUE 7.1 Terminal

OVERVIEW

Terminal PUE 7.1 series is designed for extension of industrial scales. PUE 71 features 5.7” colourful graphic touch screen display and membrane keypad. Two proximity sensors with programmable functionality offer hands-free operation.
PUE 7.1 enables plugging a set of peripherals, including: barcode scanners, receipt and label printers, transponder card readers and typical PC equipment (keyboard, mouse etc.). The terminal supports 1 weighing platform in standard version.


 

Butuh Bantuan?

Informasi Produk

FEATURES

INTERFACES

  • Ethernet
  • 2×USB
  • 2×RS 232
  • 4 in / 4 out
  • WiFi 2,4GHz b,g,n

FUNCTIONS

DOSING

Weighing process for which reference mass has been determined together with tolerance for its determination. Dosing tolerance is given in [%] and it is calculated in relation to the reference value thus being a permissible deviation of this process. This solution is used for weighing powders, liquids and loose materials. Dosing function performance is often supported with bargraph – load indicator. For industrial scales it is possible to use a control systems of dosing process.

LABELLING

Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labelling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).

PLUS/MINUS CONTROL

Control of sample’s mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualisation of weighing result is displayed in a form of a bar graph.

PERCENT WEIGHING

Percent Weighing function is used for comparision of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly  exceeded.

TOTALIZING

Function adding new mass value to already obtained one. This allows to determine mass content of the mixture, being a composition of number of different consistence components. Totalizing is limited by maximum capacity parameter.

PARTS COUNTING

Function using mass measurement for determination of  measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass / single item mass = quantity. Function operation is supperted by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with checkweighing and dosing thus industry solutions feature audio signalling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platfroms of different MAX capacities and different accuracies.

PEAK HOLD

Function registering the greatest temporary indication occurring in course of the weighing process. It is most often used in medical scales in order to hold the measurement indication.

FORMULATION

Function supporting the mixture making process, wherein the mixture contains various components. Formulation function usually uses the balance/scale database of components. Formulation serves for monitored checkweighing of every single component with a given tolerance. It is enriched with a set of individual settings.

STATISTICS

Statistiscs function registers and analyses performed measurements. This supplies the user withthe following information: Max and Min standard deviation, average value, variance, range et.

CHECKWEIGHING

Checkweighing function is used for checking whether the measured sample mass is within the predefined threshold values, Low [LO] and Hgh [HI]. The thresholds are given in [g] and [kg] units. Current state of a sample being measured is signalled by means of pictorgams located on a display for laboratory balances, for industrial scales Stackligt System is used. This visual +/- inspection is in operation during segregation, control or packing process of products for which mass has bees determined with a specifaied tolerance, eg. 12860 g 961

IR SENSORS

Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.

ANIMAL WEIGHING

Process of mass determination for a product which may unwillingly reposition within the weighing pan. Mass determination in such cases requires much longer period of time when compared to typical weighing process. It is the user who defines period of time needed for control of measured product mass. The user can thus optimize the function depending on the measured product characteristics.

DIFFERENTIAL WEIGHING

Differential weighing informs about mass variation a particular sample, wherein the said variation is a result of manufacturing processes.

Differential weighing is often applied in product control process, for which reference product parameters have been specified in order to be used as a source of comparison for the whole series.

Insuchcasestandard deviation is the information which tells about quality and completeness of a final product. For systems based on a feed-back technique such information may be used by control units.

ALIBI MEMORY

“ALIBI” memory enables saving and storing up to 100000 measurements.  Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings.
The following data related with the measurements is saved: measurement date; measurement time; result (mass); tare value; operator carrying out the measurement (logged in); product name.
The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory.
Measurements saved to balance memory cannot be deleted.
You can preview and print out the data saved to the ALIBI database.

DATASHEET

Maximum quantity of verification units6000 e
OIML ClassIII
Display5.7” resistive colour touchscreen
Protection classIP 43
Database capacity16 GB (micro SD)
Communication interface2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®
Additional DP6 A/C converter module1 (option)
Power consumption max.max. 1 A
Maximum increase of signal19.5 mV
Minimum volatge per verification unit0.4 µV
Maximum voltage per verification unit3.25 µV
Minimum load cell impedance50 Ω
Maximum load cell impedance1200 Ω
Load cell excitation voltage5V DC
Operating temperature-10 ÷ +40 °C
Relative humidity10% ÷ 85% RH no condensation
Keypadpanel touchscreen
Number of buttons8
HousingABS plastic
Operating systemLinux
Processorquad-core 64-bit Cortex-A53 1.2 GHz
MemoryRAM 1GB LPDDR2
Data memory16 GB (micro SD)
Max number of platforms2

COMPATIBLE WITH

  • Stainless steel HRP.H patforms
  • HRP plarforms High Capacity
  • Waterproof stainless steel platforms
  • Mild steel powder coated weighing platforms
  • Platforms in plastic casing
  • Ramp stainless steel platforms
  • Stainless steel ramp platfoms with LD lifting system
  • Stainless steel platforms, pit version
  • Waterproof stainless steel platforms
  • Mild steel powder coated weighing platforms
  • Audit Trail Reader
  • E2R System
  • Label Editor R02
  • Parameter Editor
  • Scales Editor 2.0
  • R.Barcode
  • R-LAB
  • RAD-KEY
  • RADWAG Connect
  • RADWAG Development Studio
  • RADWAG Remote Desktop
  • labVIEW Driver
  • Receipt Printer
  • Label Printers
  • USB Hubs
  • Moxa Uport 1110 Converter
  • AP2 – 1 Current Loop Unit
  • IN/OUT Cables
  • Cigarette lighter receptacle power supply cables
  • RS 232, RS 485 Cables
  • RS 232 cables (scale – EPSON Printer)
  • Keypad, external switches
  • Barcode Scanners
  • Stands, wall mounting kits and mounting brackets
  • Displays

Our customer support team is here to answer your questions. Ask us anything!
//
Jakarta, Banten, Sumatra & Sulawesi
ABDUL SYUKUR
Available
//
Jawa Timur & Jawa Tengah
MARYOTO
Available
//
Jawa Barat
BAYU SOFYAN
Available
NOTICE
We use cookies to make your experience of our websites better.